Product classification
产品规格 | 单位 | HXYD350 | ||||||||
合模单元Clamping Unit |
| |||||||||
合模力Clamping force | kN | 3500 | ||||||||
移动模板行程Moving mould-plate stroke | mm | 630 | ||||||||
最大模厚 Max.Mould height | mm | 650 | ||||||||
最小模厚Min.Mould height | mm | 250 | ||||||||
拉杆有效间距 Space between tie-bars | mm | 710*660 | ||||||||
液压顶出力Hydraulic ejector force | kN | 137 | ||||||||
液压顶出行程 Hydraulic ejector stroke | mm | 180 | ||||||||
顶出点数Ejector number | n | 13 | ||||||||
注射单元Injection Unit | I900 | I1000 | I1400 | |||||||
螺杆直径Screw diameter | mm | 45 | 50 | 55 | 50 | 55 | 60 | 55 | 60 | 65 |
螺杆长径比Screw L/D ratio | L/D | 22.2 | 20 | 20 | 22 | 20 | 20 | 21.8 | 20 | 20 |
理论注射容积Injection capacity in theory | cm3 | 381 | 471 | 570 | 471 | 570 | 678 | 665 | 791 | 929 |
注射重量Injection weight（ps） | g | 347 | 428 | 518 | 428 | 518 | 617 | 605 | 720 | 845 |
注射压力Injection pressure | MPa | 2469 | 2000 | 1653 | 2178 | 1800 | 1513 | 2142 | 1800 | 1534 |
注射速度Injection velocity | mm/s | 350 | 350 | 350 | ||||||
塑化能力 Plasticizing capacity | g/s | 42 | 50 | 60 | 50 | 60 | 75 | 60 | 75 | 90 |
螺杆转速 Screw speed | rpm | 400 | 400 | 400 | ||||||
其他Other |
| |||||||||
油泵压力Pump pressure | MPa | 17.5 | ||||||||
驱动功率 Motor/Driving power | kW | 37(注）+23（熔）+23（油） | 45(注）+23（熔）+37（油） | 45(注）+23（熔）+37（油） | ||||||
加热功率 Heating capacity | kW | 16.83 | 20.3 | 24.3 | ||||||
外形尺寸 Machine dimension | m | 7.32*1.88*2.21 | 7.32*1.88*2.21 | 7.32*1.88*2.28 | ||||||
机器重量 Machine weight | t | 13.2 | 13.5 | 14.1 | ||||||
油箱容积 Oil tank capacity | L | 530 | ||||||||
您当前所在位置：首页 < 
